MMP-B MICROPHONE PREAMP, LOW CUT AND HIGH BOOST (MMP-B)
A preamplifier with low cut and high-boost filters. Features active drive for impedance balancing.
You can combine this preamplifier with any modular capsule in the d:dicate™ Microphones Series.
Specifications
accessories MMP-B MICROPHONE PREAMP, LOW CUT AND HIGH BOOST (MMP-B)
Output connectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: signal – phase
Low-cut frequency, -3 dB50 Hz
Noise with shorted input A-weighted1.1 µV
Output voltage, RMS> 1.8 V
Output voltage, peak> 2.5 V
Type of electronic circuitActive
THD@1VRMS, 1kHz< 0.5 %
Dynamic range124 dB
Switchable attenuator, filters etc.High boost: +4 dB at 8 kHz. Low cut: First order filter, below 120 Hz
Output impedance< 150 ohm
Cable drive capability100 m (328 ft)
Output balance principleSignal balanced
Common mode rejection ratio (CMRR)> 40 dB
Power supply (for full performance)48 V Phantom power (± 4 V)
Current consumption4.5 mA
ColorMatte black
Weight38 g (1.3 oz)
Diameter19 mm (0.75 in)
Length99 mm (3.9 in)
Temperature range-40 °C to 45 °C (-40 °F to 113 °F)
Relative humidity (RH)Up to 90%