Adam Audio ADAM Sub12
The Sub12 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 22 Hz.
A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.
The Sub12 subwoofer provides a precise combination of low cutoff frequency (-3dB at 22Hz) and an undistorted high sound pressure level (115dB SPL at 1m).
Features & Benefits
- Bass reproduction down to 22 Hz
- Ideal addition to nearfield and midfield monitors
- Maximum Peak sound pressure in 1 m ≥ 115 dB
- Powerful, compression-free sound reproduction even at very high sound levels
- High efficiency PWM amplifier
- Low-distortion amplification at both low and high volume levels
- Special 12″ woofer with paper diaphragm
- Unrestricted bass reproduction for low-fatigue operation even at high volumes
- Easy manual or automatic (de-)activation
- If desired, monitoring is possible without the low frequencies
- Additional sub output
- Allows building a (double) bass array
- According to downward working bass reflex tube with generous dimensions and corresponding rounding
- Prevention of air turbulence noise
- Crossover frequency is selectable between 50 – 150 Hz
- Allows optimal adaptation of the total system on the bass performance of the satellites
- Connectable high-pass filter for the satellite outputs, which blocks signals below 85 Hz
- Dolby®- Fair reproduction of film sound
- Discharging the satellites from the low frequencies
- 2 years warranty with optional extension to 3 years with the registration of the product
- Full repair service if required for 5 years
Technical Data
- Subwoofer
- Number 1
- Basket Ø 12″ (310 mm)
- Voice Coil Ø 2″ (50 mm)
- Cone Material Paper
- Built-in Amplifiers
- Subwoofer 1
- Type PWM
- Amp. Power RMS / Music 200 W / 300 W
- Input Connectors
- Analog XLR / RCA
- General Data
- Frequency Response 22 Hz – 150 Hz
- THD > 60 Hz ≤1 %
- Max. peak SPL at 1 m ≥115 dB
- Crossover Frequencies 50 – 150 Hz
- Input Impedance 10 kOhm
- Panel Rear
- Weight 57.3 lb (26 kg)
- Height x Width x Depth 23.5″ (600 mm) x 14″ (360 mm) x 17.5″ (450 mm)
- Warranty 5 years (2 years warranty plus 3 years optional with product registration)
- Delivery contents Power cord, manual