5006-11A SURROUND KIT WITH THREE d:dicate™ 4006A, TWO d:dicate™4011A, CLIPS AND WINDSCREENS IN PELI™
A complete surround kit combining three d:dicate™ 4006A Omnidirectional Microphones and two d:dicate™ 4011A Cardioid Microphones, carefully factory-matched to achieve full precision.
Even though the standard tolerances on the d:dicate™ Microphone Series are extremely low, the surround match is even closer.
The specially-selected d:dicate™ 4006A Omnidirectional Microphones are matched within ±0.5 dB on both frequency response and sensitivity. The d:dicate™ 4011A Cardioid Microphones are matched within ±1 dB.
The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphones make the d:dicate™ 4006A Omnidirectional Microphones the perfect choice for all AB Stereo, Decca Tree or surround main array recordings. The precise reproduction, total transparency and natural-sounding clarity of d:dicate™ 4006A Omnidirectional Microphones will provide you with a lifetime of satisfying listening.
The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.
Bundle deal
You save 500 EUR off the list price when you buy S5 Surround Mount along with this Matched Surround Kit. The deal also applies to:
d:mension™ 5006A Surround Kit with d:dicate™ 4006A Omnidirectional Microphones
d:mension™ 5015A Surround Kit with d:dicate™ 4015 Wide Cardioid Microphones
Features
The product offers the following features
Three Omni + two Cardioid carefully matched microphones
Decca Tree front + cardioids rear
Useful as orchestral main pair
Peli™ Case transportation and protection
Frequency response of 4011A
Polar pattern of 4011A
Frequency response of 4006A
Polar pattern of 4006A
Frequency response with Close-miking Grid
Frequency response with Diffuse-field Grid
Frequency response with Nose Cone
Polar pattern with Close-miking Grid
Polar pattern with Diffuse-field Grid
Polar pattern with Nose Cone
Polar pattern with Nose Cone – Vertical
Typical on and off-axis response of a 4011F
Specifications
d:mension™ Surround Solutions 5006-11A SURROUND KIT WITH THREE d:dicate™ 4006A, TWO d:dicate™4011A, CLIPS AND WINDSCREENS IN PELI™
Directional pattern4006A: Omnidirectional; 4011A: Cardioid
Principle of operation4006A: Pressure; 4011A: Pressure gradient
Cartridge typePre-polarized condenser
Frequency range10 Hz to 20 kHz
Frequency range, ±2 dB4006A: 10 Hz to 20 kHz
Frequency range, ±2 dB, at 30 cm (11.8 in)4011A: 40 Hz to 20 kHz
Sensitivity, nominal, ±2 dB at 250 Hz4006A: 40 mV/Pa; -28 dB re. 1 V/Pa
Sensitivity, nominal, ±2 dB at 1 kHz4011A: 10 mV/Pa; -40 dB re. 1 V/Pa
Equivalent noise level, A-weighted4006A: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A)). 4011A: Typ. 18 dB(A) re. 20 µPa (max. 20 dB)
Equivalent noise level, ITU-R BS.468-44006A: Typ. 27 dB (max. 29 dB). 4011A: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)4006A: Typ. 79 dB(A). 4011A: Typ. 76 dB(A)
Total harmonic distortion (THD)< 1% up to 139 dB SPL peak
Dynamic range4006A: Typ. 124 dB. 4011A: Typ. 121 dB
Max. SPL, peak before clipping4006A: 147 dB. 4011A: 159 dB
Switchable attenuator, filters etc.0 dB / -20 dB
Output impedance< 200 Ω
Minimum load impedance2 kΩ
Cable drive capability100 m (328 ft)
Output balance principleImpedance balancing with Active Drive
Common mode rejection ratio (CMRR)> 60 dB
Power supply (for full performance)48 V Phantom power (± 4 V)
Current consumption2.8 mA
ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase
ColorMatte black
Weight4006A: 163 g (5.7 oz). 4011A: 158 g (5.6 oz)
Microphone diameter4006A: 16 – 19 mm (0.63 – 0.75 in). 4011A: 19 mm (0.75 in)
Capsule diameter4006A: 16 mm (0.63 in). 4011A: 19 mm (0.75 in)
Microphone length170 mm (6.7 in)
Maximum output voltage, RMS> 5 V
Polarity+V at pin 2 for positive sound pressure
Temperature range-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)Up to 90%
Matching tolerance (frequency response and sensitivity)4006A: ±0.5 dB. 4011A: ±1 dB
Phase deviation for kit4006A: < 5°. 4011A: < 10°
Speedy Shipping and professional packaging
Because of our long-standing partnership in a long-standing partnership with UPS, FedEx, DHL and a variety of other world-class carriers, we can provide various shipping options. Our warehouse personnel will pack every item to our exacting specifications. Prior to shipping, your goods are carefully examined and safely secured. We deliver to thousands of clients every day in a variety of countries. The fact that we are committed to becoming the biggest online retailer in the World is clear. We have distribution centers as well as warehouses located in Europe and in the USA.
Note: Orders with more than one item are assigned a processing period in accordance with the item.
Before shipping, we will inspect the ordered items thoroughly. The majority of orders are shipped within 48 hrs. The expected delivery time is between 3 and 7 days.
Returns
The inventory is always changing and we do not completely manage it because multiple stakeholders are involved, including our warehouse and factory. The levels of stock can change at any time. Be aware that it's possible for your order to be out of stock after you have placed the order.
Our policy lasts thirty days. If 30 days have passed since you purchased your item, we will not be able to offer you a return or exchange.
To be returned it must be in its original packaging, unopened and in the condition you received it in. It should also be in the original packaging.
Related products
Active Monitor
Subwoofers
Subwoofers
Monitors
Recording Microphones
Active Monitor
Studio & Recording
Drum Microphone Bundles
Drum Microphone Bundles
Active Monitor
Subwoofers
Active Monitor
Monitors
Active Monitor
Active Monitor
Active Monitor
Active Monitor
Subwoofers
Small Diaphragm Condenser
Small Diaphragm Condenser
Drum Microphone Bundles
Studio & Recording
Compressors / Limiters