REMIC V5200 WLM Violin/Viola – Studio/Live Mic. for Wired and Wireless Systems
V5200/WLM for Violin/Viola – Studio/Live
The REMIC V5200/WLM supplied with a TA5M connector allows you to connect the REMIC microphone via a variety of adapters to selected SHURE and SENNHEISER wireless transmitters which enables you to gain maximum flexibility to move around on stage during live productions.
It also enabels you to connect the V5200/WLM to a standard XLR wired connection.
Due to the fact that most beltpack wireless transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES have been designed to support wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.
The V5200/WLM is based on the same principle as the V5200 studio/live model, but is supplied with a different connector – the TA5M multi connector, which allows you to connect your V5200/WLM microphone to a variety of adapters for Shure and Sennheiser wireless systems as well as the standard XLR.
In order to connect to the wireless transmitters, you need to purchase the correct adaptor that lets you connect to one of the following wireless transmitter systems:
REMIC ADAPTERS AND SUPPORTED WIRELESS SYSTEMS:
RAD 001 | adapter for XLR 48 volt phantom, REMIC studio/live models
RAD 001LB (adapter for XLR 48 volt phantom, REMIC loud live LB models)
RAD 003 | TRS 3.5 connector
For Remic studio/live and Live mic to Sennheiser EW-series.
SK100G3/G4, SK300G3/G4, SK500G3/G4, Transmitter module 3.5 TRS w/screw lock connector.
RAD 006 | TA4 connector
For Remic studio/live and Live to SHURE with TA4F connector.
FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M, AD1)
Transmitter module with TA4M connector.
RAD 010 | LEMO-3 connector
For Remic studio/live and live microphones to SHURE (UR1M, AD1) and SENNHEISER (SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000) Transmitter modules with LEMO3 connector.
Please note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.
MORE ABOUT THE V5200/WLM MODEL:
The REMIC V5200/WLM microphone model is based on the same principle as the standard REMIC V5200 model, apart from the fact that it comes with a TA5M connector and has been designed to support wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt. It delivers a natural and open sound, an extreme accuracy and fast transient response that captures the finest and most delicate overtones of the instrument.
- For studio and live performance of chamber, classical, jazz and folk music.
- Superior gain before feedback.
- Moderate suppression of neighbor instruments and ambient noise.
- For moderate amplification of symphony orchestras, ensambles, bands and solists.
The microphone will maintain the aesthetic appearance of the instrument towards your audience, since there are no clamps and clips in order to mount and hold the microphone, you also retain a full and undisturbed view of the fretboard.
The V5200/WLM is also suitable for other violin related instruments such as hardanger fiddle / hardingfele, nyckelharpa, drejelire, hurdy-gurdy etc.
With Built-In Windshield
All microphones for strings have a built-in windshield, which is designed to drastically reduce wind noise in open air performances. The windshield is placed inside the microphone and is therefore invisible and non-removable. With the built-in windshield, you do not need to add any other windshields to your microphone. The built-in windshield does not change the quality of the microphone or sound quality in general.
- BEST FEEDBACK SUPPRESSION
- BEST SOUND QUALITY
- BEST INNOVATIVE MOUNT
V5200 WLM for Violin/Viola – Loud Live Productions
The REMIC V5200 WLM supplied with a TA5M connector allows you to connect the REMIC microphone via a variety of adapters to selected SHURE and SENNHEISER wireless transmitters which enables you to gain maximum flexibility to move around on stage in extremely loud live productions.
It also enabels you to connect the V5200 WLM to a standard XLR wired connection.
Due to the fact that most wireless beltpack transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES has been designed to support wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.
The REMIC V5200 WLM is based on the same principle as the V5200 studio/live model, but is supplied with a different connector – the TA5M multi connector, which allows you to connect your V5200 WLM microphone to a variety of adapters for Shure and Sennheiser wireless systems as well as the standard XLR.
In order to connect the REMIC V5200 WLM to a wired- or wireless-system, you need to purchase the correct adapter(s).
REMIC ADAPTERS AND SUPPORTED WIRELESS SYSTEMS:
RAD 001 | adapter for XLR 48 volt phantom, REMIC studio/live models
RAD 001LB | adapter for XLR 48 volt phantom, REMIC loud live (LB) models
RAD 003 | TRS 3.5 connector
For Remic studio/live and Live mic to Sennheiser EW-series.
SK100G3/G4, SK300G3/G4, SK500G3/G4, Transmitter module 3.5 TRS w/screw lock connector.
RAD 006 | TA4 connector
For Remic studio/live and Live to SHURE with TA4F connector.
FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M, AD1)
Transmitter module with TA4M connector.
RAD 010 | LEMO-3 connector
For Remic studio/live and live microphones to SHURE (UR1M, AD1) and SENNHEISER (SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000) Transmitter modules with LEMO3 connector.
Please note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.
MORE ABOUT THE V5200/WLM MODEL:
The REMIC V5200/WLM microphone model is based on the same principle as the standard REMIC V5200 model, apart from the fact that it comes with a TA5M connector and has been designed to support wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt. It delivers a natural and open sound, an extreme accuracy and fast transient response that captures the finest and most delicate overtones of the instrument.
- For studio and live performance of chamber, classical, jazz and folk music.
- Superior gain before feedback.
- Moderate suppression of neighbor instruments and ambient noise.
- For moderate amplification of symphony orchestras, ensambles, bands and solists.
The microphone will maintain the aesthetic appearance of the instrument towards your audience, since there are no clamps and clips in order to mount and hold the microphone, you also retain a full and undisturbed view of the fretboard.
The V5200/WLM is also suitable for other violin related instruments such as hardanger fiddle / hardingfele, nyckelharpa, drejelire, hurdy-gurdy etc.
With Built-In Windshield
All microphones for strings have a built-in windshield, which is designed to drastically reduce wind noise in open air performances. The windshield is placed inside the microphone and is therefore invisible and non-removable. With the built-in windshield, you do not need to add any other windshields to your microphone. The built-in windshield does not change the quality of the microphone or sound quality in general.
Speedy Shipping and professional packaging
Because of our long-standing partnership in a long-standing partnership with UPS, FedEx, DHL and a variety of other world-class carriers, we can provide various shipping options. Our warehouse personnel will pack every item to our exacting specifications. Prior to shipping, your goods are carefully examined and safely secured. We deliver to thousands of clients every day in a variety of countries. The fact that we are committed to becoming the biggest online retailer in the World is clear. We have distribution centers as well as warehouses located in Europe and in the USA.
Note: Orders with more than one item are assigned a processing period in accordance with the item.
Before shipping, we will inspect the ordered items thoroughly. The majority of orders are shipped within 48 hrs. The expected delivery time is between 3 and 7 days.
Returns
The inventory is always changing and we do not completely manage it because multiple stakeholders are involved, including our warehouse and factory. The levels of stock can change at any time. Be aware that it's possible for your order to be out of stock after you have placed the order.
Our policy lasts thirty days. If 30 days have passed since you purchased your item, we will not be able to offer you a return or exchange.
To be returned it must be in its original packaging, unopened and in the condition you received it in. It should also be in the original packaging.
Related products
Accessories
Microphone Accessories
Accessories
headphone Accessories
Microphone Accessories
Accessories
AMS Neve 5U rack & PSU (empty) houses up to 8x 1073/1084/2264A modules vertically AMS Neve
headphone Accessories
Accessories
headphone Accessories
headphone Accessories
Accessories
headphone Accessories
headphone Accessories
Audeze Replacement carry case and fitted insert for iSINE10 and 20 Audeze
Accessories
AMS Neve 3U rack & PSU (empty) houses up to 2x 1073/1084/2264A modules horizontally AMS Neve
headphone Accessories
Audio Interfaces
Accessories
headphone Accessories
Audeze Replacement Lightning cable for iSINE 10 & 20 (definitely not for LCD i4) Audeze
headphone Accessories
Accessories
headphone Accessories
Audeze Travel Case – Univeral fit for LCD-2/3/X/XC & EL8 Audeze
